Sensors »
Our range of sensors are specifically designed to complement our natural ventilation and lighting applications. The range includes various internal and external sensors designed to measure and assess internal carbon dioxide, external brightness, wind speed, wind direction, temperature, precipitation or humidity. All our sensor units boast superior design, ease of use and are manufactured to be maintenance free.
These products can be incorporated as part of your natural ventilation and lighting package or can be purchased separately from our online shop:
MID-CO² »
The MID-CO² transmitter detects carbon dioxide levels within an interior room space. The unit is self-calibrated regularly by ABCLogic™ and can be used for demand-controlled building ventilation. Key features of the MID-CO² Carbon Dioxide sensor include a low power supply, aesthetic design to match zone controller and an IP20 rated ABS plastic housing (white).
+ Download MID-CO² Information Sheet » 
MID-SA10 »
The MID-SA10 is an industrial grade heated rain and snow sensor for standalone control applications. The unit is suitable for connection to a BMS, gives a 0…10v signal proportional to the rainfall and has built in heaters for cold weather conditions. The MID-SA10 also features an on/off rain contact built in as standard and can be pole mounted up to 60mm diameter. The unit requires a relay module when used with MID2050-6 wiring centres (supplied separately).
+ Download MID-SA10 Information Sheet »
MID-WND20 »
The MID-WND20 is an industrial grade 24v wind speed and external temperature sensor with additional output relay for standalone controls applications. It is designed to be wall mounted as standard but comes with connections for pole mounting as required. The unit is suitable for connection to a BMS, gives a 0…10v signal proportional to the external wind speed and temperature and is IP54 rated.
The unit requires a relay module when used with MID2050-1/6 wiring centres (supplied separately).
+ Download MID-WND20 Information Sheet »
MID-WS485 »
The MID-WS485 is a highly robust 24v wind speed, external temperature and precipitation sensor. The sensor features MODbus open protocol communications suitable for integration with BMS systems utilising MODbus. The MID-WS485 emits weather data for external brightness, wind speed, external temperature and precipitation via a 2-wire RS485 cable.
The IP44 protective housing is suitable for wall or pole mounting.
+ Download MID-WS485 Information Sheet »
+ Download MID-WS485 Data Sheet »
MID-WSB »
The MID-WSB WindSonic™ is a highly robust wind speed and direction sensor for use with BEMS systems that is suitable for integration with BMS systems utilising RS232, RS432 or RS485 cable connections.
The MID-WSB emits weather data for external brightness, temperature, wind speed and precipitation and features 360° directionality, 2-axis 0-60m/s wind speed detection, is maintainence free and requires no calibration. The unit has a 2 year manufacturers warranty, comes with configuration software, means of reading output data & is IP65 protected.
Note: WindSonic™ is a trademark of Gill instruments Ltd. The manufacturer reserves the right to amend the specification and therefore the information stated on this website may be subject to change.
+ Download MID-WSB Information Sheet »
+ Download MID-WSB Data Sheet »
MID-SWS »
The MID-SWS is a highly robust, light grade wind speed sensor with readings via milliamp signals suitable for utilisation with BMS systems. The MID-SWS emits weather data for external brightness, wind speed, external temperature & precipitation and features measurements for wind speeds 0.8 – 40m/s, data output via wiring connection, is heated to prevent false readings and manufactured to be mounted to 1” pole as standard (not included). IP54 protected.
+ Download MID-SWS Information Sheet »
+ Download MID-SWS Data Sheet »
All of our sensor units benefit from the following features:
Superior Design
All of our controls are designed in the U.K. by building controls specialists and manufactured in the E.U. to current controls standards. All sensors are CE marked and conform to CE directives and feature IP rated plastic enclosures. All of our sensor units are designed and manufactured to be maintenance free.Ease of Use
They are designed to be easy to use by all building occupants with minimal training required.Energy-Saving
All units are designed with energy-saving 24v power supplies in mind.
All of these products are currently available to buy from our ONLINE SHOP.
We are able to take payment over the phone from a major credit or debit card or via bank transfer and the details of your order and lead and delivery times can be advised at this time.
Please call our dedicated online sales team on 01384 455811 to arrange payment or for more information.
